- FPC Corporation Surebonder 9600A Pneumatic Staple Gun
- Hitachi N3804AB3 1/4″ Narrow Crown Stapler
- Stanley TR250 SharpShooter Plus Heavy-Duty Staple/Brad Nail Gun
- Stanley TR45K Light Duty Staple Gun Kit
- Stanley TRE550Z Electric Staple/Brad Nail Gun
- Arrow Fastener T50 Heavy Duty Staple Gun
- NuMax S2-118G2 18-Gauge 2 In 1 Brad Nailer and Stapler
- Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun
When it comes to home repair or doing something yourself, you need to make sure that you’re getting good quality materials as possible. It is important to think of everyone’s safety when repairing something as simple as a chair or making a little tree house for your kids. With the best staple gun, you don’t need to be an engineer or a professional carpenter to achieve good quality crafts and woodwork. It’s just one squeeze away.
FPC Corporation Surebonder 9600A Pneumatic Staple Gun
While formerly included as one of the top 10 upholstery staplers last 2016, The Surebonder 9600A is also one of the top rated pneumatic staplers. This heavy duty machine is perfect for any kind of upholstery work and woodworking projects you can think of. It’s that versatile. This staple gun is user-friendly, lightweight and equipped with a safety mechanism. The rubber grips on its body make it comfortable to hold without giving tension to your arm after a number of finished jobs. It can only be powered by an air compressor with an adjustable air exhaust to estimate how deep the staples will get in every material used. It is recommended to test one first then adjust as necessary. The staple gun comes with a high-impact carrying case complete with an instruction manual, an allan wrench and a small bottle of tool oil.
The Surebonder is a dependable machine for fastening. The magazine underneath is very simple to reload and can hold a hundred staples. The kind of staple compatible with this tool is between 1/4 inches to 9/16 inches in length. Just make sure to use Surebonder #4, Arrow T50 or Stanley TRA700 Series Heavy Duty Staples to keep the machine in delivering maximum performance. It also has a view window to keep track on the number of staples available. This staple gun is one of most effective tool you will use in various home repair jobs, improvement projects and much more.
Hitachi N3804AB3 1/4″ Narrow Crown Stapler
As one of the well-known brands, Hitachi introduces the N3804AB3 1/4” Narrow Crown Stapler that is good for both internal and external trim. The product can be used well on cabinets, furniture and other types of woodwork. It uses an 18 gauge narrow crown staple with outstanding holding power that doesn’t leave a huge mark on the material. This tool is very lightweight making it easy to handle. One of the safety features of this staple gun is its non-slip elastomer handle and grip trigger for a secure hold. Another ideal feature is the ergonomically designed switch the can be flipped from bump fire mode to sequential fire mode. The first one only requires the user to hold down the trigger and position the nose to the area they want to staple. The moment the nose of the gun touches the surface of the material, it will automatically drive in a staple. You can use this mode for a faster work process. The other mode is more just like manual stapling, wherein you need to pull the trigger every time you staple. Either way, it’s as easy as pie.
In any case that you end up with a jammed staple, you don’t need to take out a screwdriver, simply open up the feeder located at the top of the nose to easily remove the stuck staple. To reload the machine, just slide the feeder of the high capacity solid steel magazine and drop the staples in place. It is capable of holding up to a hundred. Simple slide back to close. A factory installed air fitting is found at the back of the handle. The hose is angled upward slightly to provide convenience to the user as it strategically positioned not to touch the user and not to come in contact with the work surface.
Stanley TR250 SharpShooter Plus Heavy-Duty Staple/Brad Nail Gun
The Stanley TR250 is a very handy tool for heavy duty stapling. It is small enough and lightweight to carry in one hand. The handle is equipped with a wire lock to keep the lever from springing when not in use. At the back of the staple gun is a high-low power switch feature. The magazine located at the bottom of the gun can be opened by simply applying pressure to the tip where the spring can be seen then pull it out. Since the kit comes with 336 pieces of 1/4″ TRA704, 504 pieces of 5/16″ TRA705, 504 pieces of 3/8″ TRA706, 504 pieces of 1/2″ TRA708, 252 pieces of 9/16″ TRA709 and 400 pieces of 5/8″ SWKBN625 staples and brad assortment, you have a lot to choose from. Just load your chosen staples and carefully slide the magazine close and lock it back at the spring navigation.
This model is the manual kind and in order for it to function, just aim at the surface you want to staple and apply pressure to the lever. This device is really easy to use with simple instructions even if you have not used a staple gun before.
Stanley TR45K Light Duty Staple Gun Kit
Another staple gun from Stanley is the TR45K Light Duty Staple Gun Kit weighing as light as 1 pound. This device is probably one of the most affordable ones on the list. It is a simple staple gun made of stainless steel, light duty, durable and ideal for men and women use. In the case of jams, it is built with a quick-jam-clear mechanism and chrome-plated steel construction for durability. The gun comes with the Stanley Tra204T 1/4 Inch Light Duty Narrow Crown Staples pack with a thousand staples and stored perfectly secured inside a handy kit by an elastic band. The handle is comforting and easy to grip.
Just like the TR250, it has a safety latch to prevent it from accidentally triggering especially when not in use. Below the latch is an accessible compartment opened by a gentle push then pull down all the way until you can see where you can stick in your staples. Then, simply push it back inside. The portability of this staple gun makes it easy to transport from home and office use. If you’re looking for a staple gun powerful enough for common stapling needs like securing a poster in place, other light upholstery projects and selected woodwork then this one is for you.
Stanley TRE550Z Electric Staple/Brad Nail Gun
The electric staple gun from Stanley is the TRE550Z Electric Staple/Brad Nail Gun. It is almost as big and as lightweight as the TR250. The slight difference between the two is the power because this one comes with an 8-foot power cord directly plugged into an outlet. It is not battery powered. At the bottom of the handle just beside the electrical cord is the power switch. It has an easy squeeze trigger but does not come with a lock latch. There is also an adjustment knob just behind its head. The product comes with an instruction manual but no staples. The compatible staples and brads for this one are the Stanley Sharpshooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-, 9/16- and 5/8-inch brads.
To load up the staples, simply locate the magazine at the base and gently push the tip to pop out and pull the compartment back. It can accommodate a hundred staples and once you have slid them in, just push back the compartment and push the tip to lock it up in place. It works well on most wood, upholstery and other craft projects. The Stanley TRE55OZ is fit for any job and any trim whether big or small.
Arrow Fastener T50 Heavy Duty Staple Gun
Arrow is one of the world’s leading manufacturers of staples and staple guns and they are best known for the Arrow Fastener T50 Heavy Duty Staple Gun. It is made of 100% steel with chrome finish. Almost having a similar look and features as Stanley’s TR250, Arrow’s is not equipped with a lever safety latch but proclaims their product to have stood the test of time. It is easy to maneuver by simply having a firm grip on the device and squeeze the lever to release the staple. It is even equipped with a jam system mechanism to ensure great and continuous operation. Also, along the side of the staple outlet is a window indicating how many staples are left.
In order to load staples in this product, you need to locate the familiar back load system. Just pull it out, push the staples inside and put it back in place. The kind of staples you can use range from 1/4 inches to 9/16 inches. There’s a matrix provided with the device. The Arrow T50 can be put to use in different household activities. Make sure you always keep one at home.
NuMax S2-118G2 18-Gauge 2 In 1 Brad Nailer and Stapler
The NuMax S2-118G2 18-Gauge 2 in 1 Brad Nailer and Stapler is powered by an air compressor with an adjustable 360º air exhaust that can easily be re-positioned. It functions both as a stapler and a nailer which is a total money saver. The material is light weight made of die cast aluminum.The easy slide magazine can accommodate a variety of narrow crown staples from 1/2 inch to 1-5/8 inches. This tool is perfect for different kinds of wood work or upholstery improvements. It can bring together wooden frames, sofas, kitchen tables, chairs, cushions, screens and much more.
Once you have successfully connected it to your 60 PSI set compressor, you can start loading in your chosen staple size. Using the wheel on the right side, turn clockwise to increase the depth and counterclockwise to decrease it. Before getting on to your work, make sure to test it first to avoid future problems. When you’re done with all the preparation, simply start clicking away, it’s fast, easy and time-saving. You can secure it on thick wood, screens, and frames. Just keep in mind that the NuMax only accommodates narrow staples. With this device, not only will it save you money because of not hiring a professional to do the job for you, but it will also save you time because of the fast and easy mechanism giving you more time to spare for your children.
Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun
The Gardner Bender MSG-501 Heavy-Duty Cable Boss Staple Gun is uniquely designed for that long and tangling cables lying around the house. Let’s face it, managing these wires is tricky and time-consuming and talk about dangerous. Did you ever think of using the regular nail and hammer to get them in place? But, with the help of this tool, it can be done in a breeze. Available in black and red color, this device can secure NM, coaxial, voice/data, and low voltage wire and cable.
After reading about the seven staple guns on the list above, surely you are already familiar of the container located at the base of the gun where the staples are loaded. It is the same for the Garner although it uses about 3/8 inch staples. The handle has a comfortable and ergonomic design, and you can easily discharge a staple by squeezing on the lever. It’s all a matter of getting used to, really. Once you get the hang of it, you’ll have a neatly untangled living room.
Modern technology today demands innovative tools to go with it. A staple gun is not an unusual machine to find in the household nowadays. It just comes down to how advance your device is compared to others. We know you have enjoyed reading about the best staple guns we had lined up for you and already decided which one is the best of the best. However, because of their unique features and different styles, surely you can’t just settle for a single gun.
If you’re up for the pneumatic one, put a few drops of oil into the fitting before connecting to a compressor. If you get the portable ones, secure the lever with the latch if possible. And in whatever you do, take care of your tools and always apply safety measures when using a staple gun.